The Arch and the Power Poles

The Arch - at 10th and R.

One of the new obelisks on R.

R Street redevelopment continues with some recent streetscape improvements. On the 19th of January, the first phase of these improvements were officially celebrated with the lighting of the new arch. FUEL Creative Group, designers of the street arch, a smaller pedestrian arch and stand alone obelisks, drew on the industrial history of the street for inspiration. When they scouted present day R Street, they found a couple of aged metal power poles and used them as a design element.

The poles, one at 8th street and another at 21st street, have long intrigued me. They are of a latticed metal construction and certainly have an industrial flavor to them.

In my photo collection of R Street, they pop up in the background in various places. The earliest photos I have date from the mid 1930s, and they were present back then. Even in those early photos, the pole line they are a part of is mostly made up of a wooden poles. But it is evident that there were more metal poles in the past than the two survivors we have today. Interestingly, nowhere in the photos I've studied is there evidence of them further west than 8th street. And this leads me to a theory.

I speculate that the poles date back to 1908 when the Great Western Power Company built a pole line from Brighton to a power house at 8th and R Streets.

The pole at 21st and R as it looks in 2012.
It's only about 2/3rds its original height. 
That's the old Bekins Building in the background   

Around 1908, Great Western built a power house at 8th and R Streets in its bid to compete with PG&E in Sacramento - especially for industrial customers as could be found along R Street. Great Western had a big hydroelectric plant at Big Bend on the Feather River that was the largest hydroelectric operation west of the Mississippi at the time*. The company transmitted 60,000 volts** on a high tension line from Big Bend to a substation at Brighton (Folsom and Power Inn Rd) on its way to Oakland. At Brighton a smaller feeder line came into Sacramento to the power house at 8th and R Streets. According to a historical survey sheet prepared by the State of California Department of Parks and Recreation, the 'building received 22,000 volts from Brighton and transformed it to 2300 volts for urban use'.

The power house at 8th and R from a 1912 issue of Electrical World.

Great Western Power was acquired by PG&E circa 1930 and the publicly owned Sacramento Municipal Utility District (SMUD) took over the electrical grid after a long and contentious fight on the evening of the last day of 1946. The building was in use up to at least the early 1980s but has since been torn down.

I'm reasonably certain the metal power poles were headed to the power house and their job was to transmit power from Brighton - I just would like to find some documentation that they date all the way back to 1908 or at least back to the Great Western days.

I do plan on modeling at least one of these poles for one of the modules or the home layout at some point. If done well they would make a striking model.

I'm glad FUEL Creative based part of their design on these old poles. They are very likely artifacts that have been a part of the long and interesting history of electricity in Sacramento.


* photo caption next to page 199 in PG&E the Centennial History of the Pacific Gas and Electric
 **  ibid p. 223 upgraded to 100,000 volts in 1909,

Progress!

I attended one of the club's work sessions yesterday. With the help of several of my club brothers, to which I'm heartily grateful, I managed to get some critical bits done on the module. Namely: wiring. For me, this is huge. I haven't picked up a hot soldering iron in over twenty years! So it was more than handy to have the massive amounts of experience in the room.  Suddenly, I have a wired module. Some other little odds and ends to the track work were completed as well to the point where it's "operational"- at least it's ready to test that theory. This means I'll be able to have my module included in the club layout for the first time at this month's ops session. Just in time too. After this month, there are a number of public shows and my module is no where near ready for prime time yet- so I would have had to wait for 2011 to test it. And I can't really continue very far with other parts of the module build until I know the track work is OK.  Much of it will be buried in the street (probably using sculptamold) so it would be far less painful to make any adjustments now rather than later.

Note the metal cross pieces- I'm assuming those were there to help combat the expansion and contraction forces with rails embedded in pavement.

Funny that I would be thinking about the prospect of tearing up streets to get to the rails- that's exactly what's happening on the real life R Street right now. The long awaited R Street redevelopment project is kicking into high gear. And they're starting with some infrastructure improvements. If I understand things correctly the rails are going to be retained to keep the industrial flavor (one of the few flavors that does not taste like chicken...) of the street. Reach for the giant Crayola box of imaginary hues and color me "happy" and "pleased". Don't bother trying to stay in the lines.     (Thanks to Dan M for the tip that the street work had started.)